ISSN (Online): 2812-9709
Vol.1, No.2, 2022: pp.65-70
INFLUENCE OF PACKAGING PROCESS ON MECHANICAL CHARACTERISTICS OF THE FLEXIBLE PACKAGING MATERIALS
The paper aimed to examine if the mechanical characteristics (tensile strength, elongation, and friction) of the selected flexible packaging materials (BOPP and PET/PE) change after the packaging process. Some researchers have shown that mechanical characteristics can change because of the various effects to which foils are exposed (temperature, transport devices, solvents, etc.). The measurement of tensile strength and elongation was carried out according to SRPS G.S2.734, and the measurement of friction according to ASTM D 1894. The results show that there were no significant changes in the examined mechanical characteristics that could affect the functionality of the packaging.
Printing, packaging, tensile strength, elongation, friction, foils
 Flexible Packaging Market – Global Outlook and Forecast 2021–2026. Arizton Advisory and Intelligence, Chicago, USA, 2021.
 S. A. Nemes, K. Szabo, D. C. Vodnar, Applicability of Agro-Industrial By-Products in Intelligent Food Packaging. Coatings, 10(6), 2020: 550. https://doi.org/10.3390/coatings10060550
 E.M.S. Selke, J. Culter, Plastics Packaging, 3rd edition. Hanser Publishers, Munich, Germany, 2016.
 J. Kim, Designing quality on flexible packaging systems using QFD-AHP, Thesis. Michigan State University, USA, 2019.
 L. G. Hong, N. Y. Yuhana, E. Z. E. Zawawi, Review of bioplastics as food packaging materials. AIMS Materials Science, 8(2): 2021: 166-184. https://doi.org/10.3934/matersci.2021012
 L. K Ncube, A. U. Ude, E. N. Ogunmuyiwa, R. Zulkifli, I. N. Beas, Environmental Impact of Food Packaging Materials: A Review of Contemporary Development from Conventional Plastics to Polylactic Acid Based Materials. Materials, 13(21): 2020: 4994. https://doi.org/10.3390/ma13214994
 K. Dunno, Effects of transportation hazards on high barrier flexible packaging films. Journal of Applied Packaging Research, 9(1), 2017: 1-7.
 A. Gosh, Technology of Polymer Packaging. Carl Hanser Verlag, Munich, Germany, 2015.
 J. Hertlein, Untersuchung über Veränderung der Barriereeigenschaften metallisierter Kunststofffolien beim maschinellen Verarbeiten. Dissertation. Technical University of Munich, Germany, 1997. (In German)
 L. M. Junior, L.M. de Oliveira, F. B. H. Dantas, M. Cristianini, M. Padula, C. A. R. Anjos, Influence of high-pressure processing on morphological, thermal and mechanical properties of retort and metallized flexible packaging. Journal of Food Engineering, 273, 2020: 109812. https://doi.org/10.1016/j.jfoodeng.2019.109812
 C. Ge, S.S. Verma, J. Burruto, N. Ribalco, J. Ong, K. Sudhahar, Effects of flexing, optical density, and lamination on barrier and mechanical properties of metallized films and aluminum foil centered laminates prepared with polyethylene terephthalate and linear low density polyethylene. Journal of Plastic Film & Sheeting, 37(2): 2021: 205-225.
 P. Balaban. D. Viduka, V. Ristic, M. Maksin, V. Radic, R. Vladisavljevic, M. Vulic, M. Josimovic, N.Z. Radivojevic, Mechanical and barrier properties of flexible packaging materials after the flexo printing process. Journal of the National Science Foundation of Sri Lanka, 49(4), 2021: 513-523. http://doi.org/10.4038/jnsfsr.v49i4.10277
 H. Wang, C. Wang, L. Zhang, G. Chen, Q. Zhu, P. Zhang, Effect of Strain Rate on the Mechanical Properties of Cu/Ni Clad Foils. Materials, 14, 2021: 6846. https://doi.org/10.3390/ma14226846
 A. Sangroniz, J. B. Zhu, X. Tang, A. Etxeberria, E. Y.-X. Chen, H. Sardon, Packaging materials with desired mechanical and barrier properties and full chemical recyclability. Nature Communications, 10, 2019: 3559.
 A. R. Kwaku, Q. Fan, Effect of Good Product Design and Packaging on Market Value and the Performance of Agricultural Products in the Ghanaian Market. Open Access Library Journal, 7(9), 2020:1-14.
 M.C. Ndukwu, Packaging and Cold Storage of Fresh Products. Nutrition & Food Science International Journal, 4(2): 2017; 555632. https://doi.org/10.19080/NFSIJ.2017.04.555632
 A. Aljilji, O. Mahmutović, H. Bašić, N. Prazina, Mechanical properties of dried fruit packaging materials. Periodicals of Engineering and Natural Sciences, 8(4), 2020: 2547-2552. http://dx.doi.org/10.21533/pen.v8i4.1487
 I. Ljevak , I. Zjakić, D. Banić, The variability of dynamic coefficient of friction material in flexible packaging. Acta Graphica, 29(1), 2018: 31-38. https://doi.org/10.25027/agj2017.28.v29i1.153
 S. Ishteyaq, A. Neelam, O.-e. Hany, S. J. Mahmood, Physical Properties and Biodegradable Study of Metalized and NonMetalized polypropylene (PP) Films: A Comparative Research. Advances in Biotechnology & Microbiology 12(3): 2019: 555838. https://doi.org/10.19080/AIBM.2019.12.555838
 T. Anukiruthika, P. Sethupathy, A. Wilson, K. Kashampur, J. A. Moses, C. Anandharamakrishnan, Multilayer packaging: Advances in preparation techniques and emerging food applications. Comprehensive Reviews in Food Science and Food Safety, 13(3), 2020: 1156-1186. https://doi.org/10.1111/1541-4337.12556
 A.B. Morris, The Science and Technology of flexible packaging. Elsevier, 2017. https://doi.org/10.1016/C2013-0-00506-3
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)
How to Cite
P. Balaban, A. Puška, Influence of Packaging Process on Mechanical Characteristics of the Flexible Packaging Materials. Advanced Engineering Letters, 1(2), 2022: 65–70.
More Citation Formats
Balaban, P., & Puška, A. (2022). Influence of Packaging Process on Mechanical Characteristics of the Flexible Packaging Materials. Advanced Engineering Letters, 1(2), 65–70. https://doi.org/10.46793/adeletters.2022.1.2.5
Balaban, Petra, and Adis Puška. “Influence of Packaging Process on Mechanical Characteristics of the Flexible Packaging Materials.” Advanced Engineering Letters, vol. 1, no. 2, July 2022, pp. 65–70, https://doi.org/10.46793/adeletters.2022.1.2.5
Balaban, Petra, and Adis Puška. 2022. “Influence of Packaging Process on Mechanical Characteristics of the Flexible Packaging Materials.” Advanced Engineering Letters 1 (2): 65–70. https://doi.org/10.46793/adeletters.2022.1.2.5
Balaban, P. and Puška, A. (2022). Influence of Packaging Process on Mechanical Characteristics of the Flexible Packaging Materials. Advanced Engineering Letters, 1(2), pp.65–70. doi: 10.46793/adeletters.2022.1.2.5