Journal Menu

Archive

Last Edition
Journal information

Vol.1, No.1, 2022: pp.8-15

MODELING OF THE MECHANISM OF ACTION OF EPILAME FILM IN THE PROCESS OF PROCESSING

Authors:

Elena Zvyagina,

Mikhail Selemenev,

Larisa Frolenkova, Igor Kravchenko,

Yury Kuznetsov

, Sergey Velichko, Aleksandar Ašonja

,

Larisa Kalashnikova

Received: 10.10.2021.
Accepted: 22.02.2022.
Available: 31.03.2022.

Abstract:

The article discusses the mechanism of action of the epilam film during the operation of epilated drills and the influence of cutting conditions, processing conditions on their condition. Tribological tests were carried out using a special installation, where the test conditions are close to the conditions characteristic of the drilling process. Based on the results of the experiment, it was found that the effectiveness of epilam film directly depends on the cutting speed, which determines the temperature in the contact zone. Research has shown that use of oil-based LCTF MR-7 (МР-7) has the best effect on the state of epilam coating.

Keywords:

Friction coefficient, cutting lubricant, temperature, tribological tests, epilam films

References:

[1] T.V. Lomaeva,S.D. Kugultinov, V.B. Dementev, I.V. Popov, Investigation of the result of plastic deformation from the processing conditions of titanium alloy. Procedia Structural Integrity, 32, 2021: 295-298.
https://doi.org/10.1016/j.prostr.2021.09.042
[2] J.M. Rodríguez, J.M. Carbonell, P. Jonsén, Numerical Methods for the Modelling of Chip Formation. Arch. Computat. Methods Eng. 27, 2020: 387-412. https://doi.org/10.1007/s11831-018-09313-9
[3] M. Kuruc, T. Vopát, J. Peterka, M. Necpal, V. Šimna, J. Milde, F. Jurina, The Influence of Cutting Parameters on Plastic Deformation and Chip Compression during the Turning of C45 Medium Carbon Steel and 62SiMnCr4 Tool Steel. Materials, 15, 2022: 585. https://doi.org/10.3390/ma15020585
[4] I.I. Garbar, A.S. Kisel, N.A. Ryabinin, E.N. Sapgir, Nature and Mechanisms of the Action of Epilams in Friction. Pt. I. Influence of epilaming on structure and surface energy of metal. Journal of Friction and Wear, 11(5): 1990: 792-800.
[5] A.V. Morozov, Experimental estimate of tribological characteristics of epilam-coated materials that operate in threaded joints under dry friction. Journal of Friction and Wear, 35 (3), 2014: 170-176. https://doi.org/10.3103/S106836661403009X
[6] A.I. Sviridenok, A.V. Krautsevich, V.I. Lysenko, et al., Tribological properties of thin coatings based on epilams modified by nanosized silica. Journal of Friction and Wear, 35 (3), 2014: 161-169. https://doi.org/10.3103/S1068366614030143
[7] G.V. Barsukov, K.F. Selemenev, S.G. Danilchenko, A.V. Petrukhin, D.I. Titov, G.B. Pankov, Deposition process of an epilam film during surface plastic deformation. IOP Conf. Series: Materials Science and Engineering, 1029, 2021: 012005. https://doi.org/10.1088/1757-899X/1029/1/012005
[8] N.A. Ryabininin, Epilams-modifiers of friction units of machines and mechanisms of power plants. Engines construction, 4, 2002: 39-42.
[9] A.V. Morozov, Experimental determination of static and dynamic coefficients of sliding friction of epilam-coated materials. Journal of Friction and Wear, 35 (2), 2014: 84-88. https://doi.org/10.3103/S1068366614020093
[10] A.V. Kirichek, E.A. Zvyagina, Epilaming – a nanotechnology to improve the efficiency of machining. Handbook. An Engineering Journal, 2, 2007: 15-18.
[11] V.M. Boiko, R.A. Fizulakov, Possibilities of application of nanocoatings based on epilams to increase the functional qualities of the surface of articles. Reinforcing technologies and coatings, 1, 2011: 44-48.
[12] N.K. Krioni, M.Sh. Migranov, M.S. Dementyeva, V.R. Mukhamadeev, Wear resistance of multifunctional coatings during blade cutting. Vestnik of Ufa State Aviation Technical University (USATU), 20(2), 2016: 29-33.
[13] V.P. Gileta, I.B. Asanov, A.V. Bezedelnyi, Operational properties of vehicles after epilamation. Obrabotka metallov. Metal Working and Material Science, 1(74), 2017: 13-19. http://dx.doi.org/10.17212/1994-6309-2017-1-13-19
[14] B.Y. Sachek, A.M. Merzin, Studies of the performance characteristics of epilamized materials under conditions of dry friction. Journal of Machinery Manufacture and Reliability, 44 (1), 2015: 40-45. https://doi.org/10.3103/S1052618815010082
[15] A.P. Semenov, The role of epilames in tribology. Journal of Friction and Wear, 31 (6), 2010: 469-480. https://doi.org/10.3103/S1068366610060103
[16] M. Narasimha, D. Tewodros, R. Rejikumar, Improving wear resistance of cutting tool by coating. IOSR Journal of Engineering (IOSRJEN), 4(5), 2014: 06-14. https://doi.org/10.9790/3021-04520614
[17] A.T. Sarimova, I.V. Butorin, G.D. Nurlyieva, A.I. Shveev, L.N. Shafigullin, M.I. Gumerov, Epilaming of surface and wear resistance of friction pairs. Automotive Industry, 2, 2015: 36-37.
[18] O.V. Selemeneva, M.F. Selemenev, Y.A. Kuznetsov, I.N. Kravchenko, et al, Effect of tool epilamination on heterogeneity of hardening and material strength during centrifugal machining. Technology of Metals, 10, 2018: 29-35.
https://doi.org/10.31044/1684-2499-2018-10-29-35
[19] А. Vokhidov, L. Dobrovolsky, Epilamidation: an effective method for creating nanofilms. Nanoindustry, 4 (34), 2012: 32-35.
[20] A.V. Kirichek, E.A. Zvyagina, Investigation of the Effect of Epilaming on the Increase of Axial Tool Resistance. Reinforcing technologies and coatings, 1 (25), 2007: 30-36.
[21] T.V. Oblakova, Statistical Justification of the Pearson Criterion for Testing the Complex Hypothesis of Uniform Distribution of the General Population. Mechanical Engineering and Computer Technology, 4, 2018: 45-53. https://doi.org/10.24108/0418.0001392
[22] S.S. Akimov, Optimized algorithm for determining the law of probability distribution by sampling from the main entity. Izvestia of the Samara State Academy, 2, 2013: 52-56.
[23] N.I. Sidnyaev, Statistical Analysis and the Theory of Experiment Planning, ed. N.E. Bauman Moscow State Technical University, Moscow, 2017.
[24] L.B. Nikishina, Analysis of generalized planning information of multifactorial statistical experiments. Innovations and investments, 4, 2021: 183-184.

© 2023 by the authors. This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0)

Volume 2
Number 4
December 2023.

 

Loading

How to Cite

E. Zvyagina, M. Selemenev, L. Frolenkova, I. Kravchenko, Y. Kuznetsov, S. Velichko, A. Ašonja, L. Kalashnikova,  Modeling of the Mechanism of Action of Epilame Film in the Process of Processing. Advanced Engineering Letters, 1(1), 2022: 8–15.
https://doi.org/10.46793/adeletters.2022.1.1.2

More Citation Formats

Zvyagina, E., Selemenev, M., Frolenkova, L., Kravchenko, I., Kuznetsov, Y., Velichko, S., Ašonja, A., & Kalashnikova, L. (2022). Modeling of the Mechanism of Action of Epilame Film in the Process of Processing. Advanced Engineering Letters1(1), 8–15. https://doi.org/10.46793/adeletters.2022.1.1.2

Zvyagina, Elena, et al. “Modeling of the Mechanism of Action of Epilame Film in the Process of Processing.” Advanced Engineering Letters, vol. 1, no. 1, 2022, pp. 8–15, https://doi.org/10.46793/adeletters.2022.1.1.2.

Zvyagina, Elena, Mikhail Selemenev, Larisa Frolenkova, Igor Kravchenko, Yury Kuznetsov, Sergey Velichko, Aleksandar Ašonja, and Larisa Kalashnikova. 2022. “Modeling of the Mechanism of Action of Epilame Film in the Process of Processing.” Advanced Engineering Letters 1 (1): 8–15. https://doi.org/10.46793/adeletters.2022.1.1.2.

Zvyagina, E., Selemenev, M., Frolenkova, L., Kravchenko, I., Kuznetsov, Y., Velichko, S., Ašonja, A. and Kalashnikova, L. (2022). Modeling of the Mechanism of Action of Epilame Film in the Process of Processing. Advanced Engineering Letters, 1(1), pp.8–15. doi: 10.46793/adeletters.2022.1.1.2.