Reviewer Board

About Review Board

Peer review is a critical element of scholarly publication, and one of the major cornerstones of the scientific process. It ensures that published research is sound and properly verified and improves the quality of the research.
Reviewers for Advanced Engineering Letters journal are selected by the handling editors based on their expertise. Experts volunteer their time and effort to provide scientific critiques of manuscripts submitted to our journal that assist the editors to make informed decisions about manuscript acceptance.
Therefore the editors of Advanced Engineering Letters Journal would like to thank the following colleagues who reviewed on a voluntary basis all manuscripts submitted over the past period. Their help highly improved the quality of our journal.

Reviewers

Ph.D. Alexey Kossenko
Ariel University, Department of Chemical Engineering and Biotechnology, Ramat HaGolan Street 65, 40700 Ariel, Israel

Ph.D. Aleksandar Marinković
University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11.000 Belgrade, Serbia

Ph.D. Kassenov Assylbek Zhumabekovich
Toraighyrov University, Faculty of Engineering, Lomov Street 64, 140008, Pavlodar, Kazakhstan

Ph.D. Miroslav Babić
University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia

Ph.D. Sanjay W. Rukhande
Fr. C. Rodrigues Institute of Technology, Agnel Technical Education Complex, Sector 9-A, Vashi, Navi Mumbai, Maharashtra, India

Ph.D. Dušan Arsić
University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia

Ph.D. Yu Kok Hwa
Universiti Sains Malaysia, School of Mechanical Engineering, Engineering Campus, 14300, Nibong Tebal, Pulau Pinang, Malaysia

Ph.D. Borislav Savković
University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia

Ph.D. Mirko Karakašić
Josip Juraj Strossmayer University of Osijek, Faculty of Mechanical Engineering, Trg Ivane Brlić Mažuranić 2, 35000 Slavonski Brod, Croatia 

Ph.D. Roman R. Dema 
Nosov Magnitogorsk State Technical University, Magnitogorsk Moscow Institute of Steel and Alloys, Lenin Street 38, 455000 Magnitogorsk city, Chelyabinsk Region, Russia

Ph.D. Tran Van Dua
Hanoi University of Industrial, Faculty of Mechanical Engineering, 298 Cau Dien Street, Bac Tu Liem District, Hanoi, Viet Nam

Ph.D. Milan Rackov
University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia

Ph.D. Branislav Sredanović 
University of Banja Luka, Faculty of Mechanical Engineering, Stepe Stepanovica 71, 78000 Banja Luka, Republic of Srpska, Bosnia and Herzegovina

Ph.D. Ruzica Nikolić
University of Žilina, Research Center, Univerzitná 8215/1, 010 26 Žilina, Slovakia

Ph.D. Lalit K. Toke
Sandip Institute of Engineering and Management, Trimbak Road, Nashik, Maharashtra, India

Ph.D. Mara Kandeva
Technical University of Sofia, Faculty of Industrial Technology, Kliment Ohridski Blvd. 8, 1979 Sofia, Bulgaria

Ph.D. Jasmina Skerlić
University of Prishtina, Faculty of Technical Sciences, Department of Materials and Metallurgy, Knjaza Miloša 7, 38220 Kosovska Mitrovica, Serbia

Ph.D. Roman Čička
Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology, Paulínska 16, 917 24 Trnava, Slovak Republic

Ph.D. Branko Štrbac
University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia

Ph.D. Biljana Marković
University of East Sarajevo, Faculty of Mechanical Engineering, Vuka Karadžića 30, 71126 Lukavica, East Sarajevo Bosnia and Herzegovina

Ph.D. Lozica Ivanović
University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia

Ph.D. Dejan Marić
Josip Juraj Strossmayer University of Osijek, Faculty of Mechanical Engineering, Trg Ivane Brlić Mažuranić 2, 35000 Slavonski Brod, Croatia 

Ph.D. Jasmina Pekez
University of Novi Sad, Technical Faculty “Mihajlo Pupin”, Djure Djakovića bb, 23000 Zrenjanin, Serbia

Ph.D. Milija Krajišnik
University of East Sarajevo, Faculty of Mechanical Engineering, Vuka Karadžića 30, 71126 Lukavica, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina

Ph.D. Nguyen Hong Son
Hanoi University of Industrial (HaUI), Faculty of Mechanical Engineering, 298 Cau Dien Street, Bac Tu Liem District, Hanoi, Viet Nam

Ph.D. Veljko Vuković
PIM University of Business Engineering and Management, Technical Faculty, Despota Stefana Lazarevića bb, 78000 Banja Luka, Bosnia and Herzegovina

Ph.D. Vukić Lazić
University of Kragujevac, Faculty of Engineering, Sestre Janjić 6, 34000 Kragujevac, Serbia

Ph.D. Vikas Singh Panwar 
Dr. D. Y. Patil Institute of Technology, Department of Automation and Robotics, Pimpri, Pune – 411018, Maharashtra, India